The compact and reliable combustion system for pellets.
1. stoking with stoker
2. fire trough with large grate ribs and primary air supply
3. burnout grate
4. combustion chamber
5. secondary air inlet
6. radiation vault
7. 3 draughtheat exchanger
8. controlled boiler bypass (optional)
9. multicyclone with automatic discharge of fly ash
10. boiler door with pneumatic boiler tube cleaning system
11. furnace door with safety lock
12. automatic discharge of grate ash into ash garbage can or ash container
13. ash garbage can or ash container.
14. boiler cladding for reduced radiation loss and noise emissions
15. air intake openings
16. pressure relief damper
17. automatic pressure surge cleaning boiler bypass (optional)
18. cleaning opening on both sides for multicyclone
13. ash garbage can or container
14. boiler cladding for reduced radiation loss and noise emissions
17. automatic pressure surge cleaning boiler bypass (optional)
18. cleaning opening on both sides for multicyclone
19. flue gas recovery
20. fly ash garbage can
Boiler size | Unit | 180 / 200 | 300 / 360 | 450 / 550 | 700 / 900 |
|---|---|---|---|---|---|
Rated power at M45 | kW | 54 - 240 | 90 - 360 | 135 - 550 | 210 - 900 |
Mass (L x W x H) | mm | 3275 x 1150 x 2290 | 3495 x 1250 x 2340 | 4005 x 1440 x 2540 | 4625 x 1600 x 3090 |
Water content boiler | l | 645 | 855 | 1315 | 2355 |
Weight Tota with water | kg | 5410 | 6455 | 8815 | 10640 |
You can find more information about our discharge systems here >>
Schmid AG wood-burning furnaces have intuitive operation – the Personal Touch visio control system. It guarantees optimal combustion conditions with high efficiencies. In addition to a modern design and high user-friendliness, the web technology HMTL5, the worldwide standard for modern web browsers, is in use.
The use of this technology results in versatile possibilities of how the firing systems can be operated. Four independent connections can be made simultaneously to the plant for operation via a smartphone, tablet or the built-in touch panel.
You can find more information about the new PersonalTouch visio operation here >>.
The temperature of the primary air used for combustion is of great importance for an energy-efficient combustion process. The use of a combustion air preheater makes it possible to reduce the nominal output to 15 % in controlled part-load operation.
Up to 900 kW nominal power and at a maximum fuel moisture of M 35, electric industrial hot air blowers are available for igniting the fuel in the firing pan or on the moving grate.
Boiler bypass for raising the exhaust gas temperature in startup and shutdown operation. This increases the filter availability.
The heat exchanger tubes are equipped with plug-in turbulators for the
lowering the exhaust gas temperature. This increases the
efficiency of the furnace is increased. In the case of frequent operation in partial or
the turbulators may have to be removed if there is no boiler bypass.
if no boiler bypass is available.
If one or both options are selected (boiler bypass and intermediate ceiling cleaning), the central pressure line is required as a pressure accumulator required.
Three flow temperature ranges up to 115 °C, TÜV tested, are available for hot water boilers:
Regulierte Beimischung von Abgas in Primär- und Sekundärzonen zum Absenken der Rosttemperatur, der Gewährleistung des Ausbrandes beim Eintritt
der Sekundärluft und der Kühlung der Brennkammer. Empfehlenswert bei
Brennstoffen mit hohem Heizwert (<M30), bei tiefem Ascheschmelzpunkt
und in Kombination mit DeNox-Verfahren und Abgaskondensationsanlagen.
Are you replacing a fossil gas or oil heating system with a renewable heating system? Benefit from attractive subsidies.
Gewerbe | Industrie | Pellets | UTSP
Benefit from our many years of experience and let our specialists advise you individually, without obligation and free of charge.
The UTSP visio system works on the principle of underfeed grate firing. The pellets are fed from below into a combustion retort made of high-alloy cast iron. The entire combustion chamber is lined with refractory material and ensures a high firing temperature.
The primary air is fed through the cast bars in the combustion retort, where it produces a quiet gasification of the combustion material. The secondary air supplied in the combustion chamber ensures optimum burnout and thus low emission values. Ash removal takes place via a burnout grate. An ash screw is arranged under the burnout grate, with which the ash is conveyed directly into an ash bucket or into a container.
The firing unit is completely surrounded by the primary and secondary air and, together with the effective insulation, ensures minimal radiation. A well-dimensioned 3-pass flue tube boiler is mounted above the firing unit.
